EBYTE E810-DTU (RS485) V2 Modbus RS485 to ETHERNET Device Converter

##############################
READY STOCK, SILAHKAN LANGSUNG ORDER
##############################

EBYTE E810-DTU (RS485) V2 - Support MODBUS 

Modbus RS485 to ETHERNET Converter 

Power Supply Input : 8V - 28VDC 

---

FEATURES: 
Ethernet RJ45 to RS485 Serial Port Server Wireless Transceiver Modem E810-DTU(RS485)-V2.0 TCP UDP 100M Full Duplex Module 

SPECIFICATIONS: 
Size : 66 * 66 *21.6mm 
Weight : 791g 
PCB process : 2 layerSMT, lead-free 
Connector : RS485/RS2321*5*3.81mm 
Supply voltage : 8~28V DC (Note : Higher than 28V will cause permanent damage) 
UART standard : 300~256000 bps 
Serial communication level : 3.3V (If connected to 5V, level conversion is required)
Ethernet specification : RJ4510/100Mbps 
Network protocol : IP TCP/UDP ARP ICMP IPV4 
IP Acquisition : Static IP, DHCP, DNS
Available User configuration : PC software ,AT command configuration Web page configuration 
Simple transparent transmission : TCP Server TCP Client UDP Server UDP Client TCP 
Server connection : Max. 6 channel of TCP connections 
Package mode : 200 bytes per package 
Operating current : 77.0314mA@12V(RS485) 74.5635mA@12V(RS232) 
Operating temperature : -40 ~ +85 
Operating humidity : 10% ~ 90%relative humidity, no condensation 
Storage temperature : -40 ~ +125 

---